Zircon fission‐track ages from Newfoundland—A proxy for high geothermal gradients and exhumation before opening of the Central Atlantic Ocean

Following Appalachian orogenesis, metamorphic rocks in central Newfoundland were exhumed and reburied under Tournaisian strata. New zircon fission‐track (ZFT) ages of metamorphic rocks below the Tournaisian unconformity yield post‐depositionally reset ages of 212–235 Ma indicating regional fluid‐absent reheating to at least ≥220°C. Post‐Tournaisian sedimentary thicknesses in surrounding basins show that burial alone cannot explain such temperatures, thus requiring that palaeo‐geothermal gradients increased to ≥30–40°C/km before final late Triassic accelerated cooling. We attribute these elevated palaeo‐geothermal gradients to localized thermal blanketing by insulating sediments overlying radiogenic high‐heat‐producing granitoids. Late Triassic rifting and magmatism before break up of Pangaea likely also contributed to elevated heat flow, as well as uplift, triggering late Triassic accelerated cooling and exhumation. Thermochronological ages of 240–200 Ma are seen throughout Atlantic Canada, and record rifting and basaltic magmatism on the conjugate margins of the Central Atlantic Ocean preceding the onset of oceanic spreading at ~190 Ma.     

Seafloor multibeam backscatter calibration experiment: comparing 45°-tilted 38-kHz split-beam echosounder and 30-kHz multibeam data

Obtaining absolute seafloor backscatter measurements from hydrographic multibeam echosounders is yet to be achieved. We propose a low-cost experiment to calibrate the various acquisition modes of a 30-kHz Kongsberg EM 302 multibeam echosounder in a range of water depths. We use a 38-kHz Simrad EK60 calibrated fisheries split-beam echosounder mounted at 45° angle on the vessel’s hull as a reference for the calibration. The processing to extract seafloor backscatter from the EK60 requires bottom detection, ray tracing and motion compensation to obtain acceptable geo-referenced backscatter measurements from this non-hydrographic system. Our experiment was run in Cook Strait, New Zealand, on well-known seafloor patches in shallow, mid, and deep-water depths. Despite acquisition issues due to weather, our results demonstrate the strong potential of such an approach to obtain system’s absolute calibration which is required for quantitative use of backscatter strength data.     

Pliocene and late Pleistocene (MIS 5e) decapod crustaceans from Santa Maria Island (Azores Archipelago: Central Atlantic): systematics,palaeoecology and palaeobiogeography

The presence of decapod crustaceans in the Pliocene and Pleistocene (MIS 5e) fossil record of Santa Maria Island (Azores Archipelago) is herein reviewed. Our study raises the number of fossil decapods from this island from one species to 10 taxa (three for the Pliocene and seven for the Last Interglacial). Four of these 10 taxa are reported for the first time in the fossil record, worldwide. A new species of a mud shrimp is also described (Upogebia azorensis n. sp.). Our study suggests that the Plio–Pleistocene decapod assemblages of the Azores did not differ significantly from modern ones, being dominated by species that are today widespread across the Webbnesia ecoregion, the Mediterranean Sea, and the eastern Atlantic shores, including the Azores. As far as can be judged from the limited fossil record, apparently no tropical crab species with a Cabo Verdean/Senegalese provenance reached the Azores during windows of opportunity associated with Glacial Termination 2 or with the initial setting of the Last Interglacial period. This contribution increases the total number of marine taxa reported for the Pliocene and Pleistocene outcrops of Santa Maria Island to 218 and 155, respectively, highlighting the scientific relevance of its palaeontological heritage.     

A multi‐storage groundwater concept for the SWAT model to emphasize nonlinear groundwater dynamics in lowland catchments

Hydrological models are useful tools to analyze present and future conditions of water quantity and quality. The integrated modelling of water and nutrients needs an adequate representation of the different discharge components. In common with many lowlands, groundwater contribution to the discharge in the North German lowlands is a key factor for a reasonable representation of the water balance, especially in low flow periods. Several studies revealed that the widely used Soil and Water Assessment Tool (SWAT) model performs poorly for low flow periods. This paper deals with the extension of the groundwater module of the SWAT model to enhance low flow representation. The current two‐storage concept of SWAT was further developed to a three‐storage concept. This was realized due to modification of the groundwater module by splitting the active groundwater storage into a fast and a slow contributing aquifer. The results of this study show that the groundwater module with three storages leads to a good prediction of the overall discharge especially for the recession limbs and the low flow periods. The improved performance is reflected in the signature measures for the mid‐segment (percent bias ?2.4% vs ?15.9%) and the low segment (percent bias 14.8% vs 46.8%) of the flow duration curve. The three‐storage groundwater module is more process oriented than the original version due to the introduction of a fast and a slow groundwater flow component. The three‐storage version includes a modular approach, because groundwater storages can be activated or deactivated independently for subbasin and hydrological response unit level. Copyright © 2013 John Wiley & Sons, Ltd.     

Differential response at the seafloor during Palaeocene and Eocene ocean warming events at Walvis Ridge,Atlantic Ocean (ODP Site 1262)

The Latest Danian Event (LDE, c. 62.1 Ma) is an early Palaeogene hyperthermal or transient (<200 ka) ocean warming event. We present the first deep‐sea benthic foraminiferal faunal record to study deep‐sea biotic changes together with new benthic (Nuttallides truempyi) stable isotope data from Walvis Ridge Site 1262 (Atlantic Ocean) to evaluate whether the LDE was controlled by similar processes as the minor early Eocene hyperthermals. The spacing of the double negative δ¹³C and δ¹⁸O excursion and the slope of the δ¹⁸O–δ¹³C regression are comparable, strongly suggesting a similar orbital control and pacing of eccentricity maxima as well as a rather homogeneous carbon pool. However, in contrast to early Eocene hyperthermals, the LDE exhibits a remarkable stability of the benthic foraminiferal fauna. This lack of benthic response could be related to the absence of threshold‐related circulation changes or better pre‐adaptation to elevated deep‐sea temperatures, as the LDE was superimposed on a cooling trend, in contrast to early Eocene warming.     

Modeling and observations of high-frequency flow variability and internal waves at a Caribbean reef spawning aggregation site

The characteristics and forcing mechanisms of high-frequency flow variations (periods of minutes to days) were investigated near Gladden Spit, a reef promontory off the coast of Belize. Direct field observations and a high-resolution (50-m grid size) numerical ocean model are used to describe the flow variations that impact the initial dispersion of eggs and larvae from this site, which serves as a spawning aggregation site for many species of reef fishes. Idealized sensitivity model experiments isolate the role of various processes, such as internal waves, wind, tides, and large-scale flow variations. The acute horizontal curvature and steep topography of the reef intensify the flow, create small-scale convergence and divergence zones, and excite high-frequency oscillations and internal waves. Although the tides in this area are relatively small (∼10-cm amplitude), the model simulations show that tides can excite significant high-frequency flow variations near the reef, which suggests that the preference of fish to aggregate and spawn in the days following the time of full moon may not be coincidental. Even small variations in remote flows (2–5 cm s⁻¹) due to say, meso-scale eddies, are enough to excite near-reef oscillations. Model simulations and the observations further suggest that the spawning site at the tip of the reef provides initial strong dispersion for eggs, but then the combined influence of the along-isobath flow and the westward wind will transport the eggs and larvae downstream of Gladden Spit toward less turbulent region, which may contribute to enhanced larval survival.     

Thermally induced wind patterns in the Sahelian city of Ouagadougou, Burkina Faso

The urban surface wind field in the dry-tropical city of Ouagadougou, Burkina Faso was studied based on data collected at one urban and one suburban station during early dry season. An intra-urban thermal breeze, creating almost opposite wind directions at the two sites, was found during nights with high atmospheric stability. The high atmospheric stability suggests a decoupling of the surface wind layer from the layer above, allowing the wind system to develop due to the strong intra-urban temperature gradients in the city. Frequent temporary breakdowns of the thermal wind system were noticed, generally generating a turn in wind direction towards that of the regional wind, thus indicating a re-coupling with a stronger wind flow in the wind layer above.     

Mechanical compaction and ultrasonic velocity of sands with different texture and mineralogical composition

This study presents the results of experimental compaction while measuring ultrasonic velocities of sands with different grain size, shape, sorting and mineralogy. Uniaxial mechanical compaction tests up to a maximum of 50 MPa effective stress were performed on 29 dry sand aggregates derived from eight different sands to measure the rock properties. A good agreement was found between the Gassmann saturated bulk moduli of dry and brine saturated tests of selected sands. Sand samples with poor sorting showed low initial porosity while sands with high grain angularity had high initial porosity. The sand compaction tests showed that at a given stress well‐sorted, coarse‐grained sands were more compressible and had higher velocities (Vp and Vs) than fine‐grained sands when the mineralogy was similar. This can be attributed to grain crushing, where coarser grains lead to high compressibility and large grain‐to‐grain contact areas result in high velocities. At medium to high stresses the angular coarse to medium grained sands (both sorted sands and un‐sorted whole sands) showed high compaction and velocities (Vp and Vs). The small grain‐to‐grain contact areas promote higher deformation at grain contacts, more crushing and increased porosity loss resulting in high velocities. Compaction and velocities (Vp and Vs) increased with decreasing sorting in sands. However, at the same porosity, the velocities in whole sands were slightly lower than in the well‐sorted sands indicating the presence of loose smaller grains in‐between the framework grains. Quartz‐poor sands (containing less than 55% quartz) showed higher velocities (Vp and Vs) compared to that of quartz‐rich sands. This could be the result of sintering and enlargement of grain contacts of ductile mineral grains in the quartz‐poor sands increasing the effective bulk and shear stiffness. Tests both from wet measurements and Gassmann brine substitution showed a decreasing Vp/Vs ratio with increasing effective stress. The quartz‐rich sands separated out towards the higher side of the Vp/Vs range. The Gassmann brine substituted Vp and Vs plotted against effective stress provide a measure of the expected velocity range to be found in these and similar sands during mechanical compaction. Deviations of actual well log data from experimental data may indicate uplift, the presence of hydrocarbon, overpressure and/or cementation. Data from this study may help to model velocity‐depth trends and to improve the characterization of reservoir sands from well log data in a low temperature (<80–100^o C) zone where compaction of sands is mostly mechanical.     

Derivation of Structure Parameters of Temperature and Humidity in the Convective Boundary Layer from Large-Eddy Simulations and Implications for the Interpretation of Scintillometer Observations

We derive the turbulent structure parameters of temperature $C_{T}^2$ and humidity $C_q^2$ from high-resolution large-eddy simulations (LES) of a homogeneously-heated convective boundary layer. Boundary conditions and model forcing were derived from measurements at Cabauw in The Netherlands. Three different methods to obtain the structure-parameters from LES are investigated. The shape of the vertical structure-parameter profiles from all three methods compare well with former experimental and LES results. Depending on the method, deviations in the magnitude up to a factor of two are found and traced back to the effects of discretization and numerical dissipation of the advection scheme. Furthermore, we validate the LES data with airborne and large-aperture scintillometer (LAS) measurements at Cabauw. Virtual path measurements are used to study the variability of $C_{T}^2$ in the mixed layer and surface layer and its implications for airborne and LAS measurements. A high variability of $C_{T}^2$ along a given horizontal path in the LES data is associated with plumes (high values) and downdrafts (low values). The path average of $C_{T}^2$ varies rapidly in time due to the limited path length. The LES results suggest that measured path averages require sufficient temporal averaging and an adequate ratio of path length to height above the ground for the LAS in order to approach the domain average of $C_{T}^2$ .